YT6PT-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YT6PT-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Dg/Rx*
1788566985	12.6 Volt	230 Pkt	40 Pkt	93 %	19.23 %
1788566385	12.6 Volt	210 Pkt	40 Pkt	93 %	20.09 %
1788565785	12.6 Volt	210 Pkt	40 Pkt	91 %	19.72 %
1788565185	12.6 Volt	220 Pkt	40 Pkt	94 %	19.2 %
1788564585	12.6 Volt	220 Pkt	40 Pkt	92 %	18.75 %
1788563985	12.6 Volt	220 Pkt	40 Pkt	92 %	18.75 %
1788563385	12.6 Volt	210 Pkt	40 Pkt	92 %	19.53 %
1788562785	12.6 Volt	220 Pkt	40 Pkt	94 %	19.64 %
1788562185	12.6 Volt	220 Pkt	40 Pkt	95 %	19.64 %
1788561585	12.6 Volt	210 Pkt	40 Pkt	94 %	18.96 %
1788560985	12.6 Volt	210 Pkt	40 Pkt	95 %	18.35 %
1788560385	12.6 Volt	210 Pkt	30 Pkt	95 %	17.92 %
1788559785	12.6 Volt	210 Pkt	30 Pkt	96 %	17.84 %
1788559185	12.6 Volt	210 Pkt	30 Pkt	96 %	17.76 %
1788558585	12.6 Volt	210 Pkt	30 Pkt	95 %	18.01 %
1788557985	12.6 Volt	210 Pkt	30 Pkt	97 %	18.01 %
1788557385	12.6 Volt	200 Pkt	30 Pkt	98 %	18.72 %
1788556785	12.6 Volt	200 Pkt	30 Pkt	98 %	19.21 %
1788556185	12.6 Volt	200 Pkt	40 Pkt	98 %	19.23 %
1788555585	12.6 Volt	200 Pkt	40 Pkt	98 %	19.61 %
1788554985	12.6 Volt	210 Pkt	40 Pkt	96 %	19.05 %
1788554385	12.6 Volt	200 Pkt	40 Pkt	95 %	19.42 %
1788553785	12.6 Volt	200 Pkt	30 Pkt	95 %	18.84 %
1788553185	12.6 Volt	210 Pkt	30 Pkt	94 %	18.31 %
1788552585	12.6 Volt	200 Pkt	30 Pkt	93 %	19.12 %

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg/Rx: 0, 0.001, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)