SR5YAM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5YAM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1780165205	69 Deg.C	2 %
1780164601	69 Deg.C	2 %
1780164005	69 Deg.C	2 %
1780163401	70 Deg.C	2 %
1780162805	71 Deg.C	2 %
1780162201	77 Deg.C	2 %
1780161604	68 Deg.C	2 %
1780161002	69 Deg.C	2 %
1780160405	69 Deg.C	2 %
1780159801	69 Deg.C	2 %
1780159202	70 Deg.C	2 %
1780158605	69 Deg.C	2 %
1780158002	70 Deg.C	2 %
1780157405	69 Deg.C	2 %
1780156802	67 Deg.C	2 %
1780156323	69 Deg.C	2 %
1780155601	69 Deg.C	2 %
1780155001	68 Deg.C	2 %
1780154404	69 Deg.C	2 %
1780153802	69 Deg.C	2 %
1780153204	69 Deg.C	2 %
1780152601	69 Deg.C	2 %
1780152005	69 Deg.C	2 %
1780151402	69 Deg.C	2 %
1780150802	70 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)