PY2WOA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PY2WOA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RX Avg 30m*	TX Avg 30m*	RX Count 30m*	TX Count 30m*
1788675408	0 erlang	0.03 erlang	0 receptions	3 transmissions
1788673608	0 erlang	0.03 erlang	0 receptions	2 transmissions
1788671808	0 erlang	0.03 erlang	0 receptions	2 transmissions
1788670008	0 erlang	0.03 erlang	0 receptions	4 transmissions
1788668208	0 erlang	0.03 erlang	0 receptions	6 transmissions
1788666408	0 erlang	0.03 erlang	0 receptions	8 transmissions
1788664608	0 erlang	0.03 erlang	0 receptions	5 transmissions
1788662808	0 erlang	0.03 erlang	0 receptions	7 transmissions
1788661008	0 erlang	0.04 erlang	0 receptions	14 transmissions
1788659208	0 erlang	0.03 erlang	0 receptions	7 transmissions
1788657408	0 erlang	0.03 erlang	0 receptions	2 transmissions
1788655608	0.02 erlang	0.05 erlang	3 receptions	18 transmissions
1788653808	0.17 erlang	0.6 erlang	15 receptions	40 transmissions
1788652008	0.03 erlang	0.22 erlang	8 receptions	38 transmissions
1788650208	0 erlang	0.67 erlang	0 receptions	39 transmissions
1788648408	0 erlang	0.04 erlang	0 receptions	10 transmissions
1788646608	0 erlang	0.91 erlang	0 receptions	38 transmissions
1788644808	0 erlang	0.53 erlang	0 receptions	37 transmissions
1788643008	0 erlang	0.13 erlang	0 receptions	34 transmissions
1788641208	0 erlang	0.26 erlang	0 receptions	52 transmissions
1788639408	0 erlang	0.05 erlang	5 receptions	30 transmissions
1788637608	0 erlang	0.27 erlang	0 receptions	27 transmissions
1788635808	0.02 erlang	0.86 erlang	5 receptions	53 transmissions
1788634008	0.32 erlang	0.75 erlang	16 receptions	37 transmissions
1788632208	0 erlang	0.04 erlang	7 receptions	21 transmissions

*Used Equation Coefficients:

RX Avg 30m: 0, 0.001, 0

TX Avg 30m: 0, 0.001, 0

RX Count 30m: 0, 1, 0

TX Count 30m: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)