SQ3KNL-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ3KNL-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1780527618	34 Deg.C	24 %
1780527002	47 Deg.C	3 %
1780525205	45 Deg.C	8 %
1780524005	45 Deg.C	8 %
1780521292	38 Deg.C	7 %
1780071784	48 Deg.C	18 %
1780071002	43 Deg.C	2 %
1780070411	46 Deg.C	3 %
1780069801	49 Deg.C	2 %
1780069207	48 Deg.C	3 %
1780068602	47 Deg.C	2 %
1780068002	46 Deg.C	2 %
1780067405	44 Deg.C	2 %
1780066802	42 Deg.C	2 %
1780066205	42 Deg.C	2 %
1780065602	47 Deg.C	3 %
1780062605	45 Deg.C	6 %
1780025405	43 Deg.C	2 %
1780024802	43 Deg.C	2 %
1780024205	43 Deg.C	2 %
1780023602	42 Deg.C	2 %
1780023002	43 Deg.C	2 %
1780022486	43 Deg.C	2 %
1780021802	43 Deg.C	2 %
1780021205	43 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)