HS5AU-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5AU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	VBAT*	IBAT*	SOLAR*	SUN*	TEMP*
1780514250	13.15 V	45 mA	7.43 V	2 W/m²	24.87 °C
1780513650	13.15 V	42 mA	7.43 V	2 W/m²	24.93 °C
1780513050	13.15 V	61 mA	7.43 V	2 W/m²	24.66 °C
1780512450	13.15 V	42 mA	7.44 V	2 W/m²	24.73 °C
1780511850	13.15 V	48 mA	7.44 V	2 W/m²	24.75 °C
1780511250	13.15 V	44 mA	7.44 V	2 W/m²	24.68 °C
1780510650	13.15 V	46 mA	7.44 V	2 W/m²	24.84 °C
1780510050	13.15 V	66 mA	7.44 V	2 W/m²	25 °C
1780509450	13.13 V	138 mA	7.44 V	2 W/m²	25.07 °C
1780508850	13.15 V	43 mA	7.44 V	2 W/m²	25.14 °C
1780508250	13.15 V	45 mA	7.44 V	2 W/m²	25.2 °C
1780507650	13.14 V	67 mA	7.44 V	2 W/m²	25.36 °C
1780507050	13.15 V	44 mA	7.44 V	2 W/m²	25.44 °C
1780506450	13.15 V	44 mA	7.44 V	2 W/m²	25.59 °C
1780505850	13.15 V	46 mA	7.44 V	2 W/m²	25.71 °C
1780505250	13.15 V	47 mA	7.44 V	2 W/m²	25.77 °C
1780504650	13.15 V	46 mA	7.44 V	2 W/m²	25.8 °C
1780504051	13.15 V	70 mA	7.44 V	2 W/m²	25.97 °C
1780503450	13.15 V	43 mA	7.44 V	2 W/m²	26.07 °C
1780502850	13.15 V	80 mA	7.44 V	2 W/m²	26.35 °C
1780502251	13.15 V	60 mA	7.44 V	2 W/m²	26.42 °C
1780501650	13.15 V	49 mA	7.44 V	2 W/m²	26.08 °C
1780501050	13.15 V	51 mA	7.44 V	2 W/m²	26.17 °C
1780500450	13.15 V	42 mA	7.45 V	2 W/m²	26.37 °C
1780499850	13.15 V	47 mA	7.44 V	2 W/m²	26.25 °C

*Used Equation Coefficients:

VBAT: 0, 0.01, 0

IBAT: 0, 1, -2000

SOLAR: 0, 0.01, 0

SUN: 0, 1, 0

TEMP: 0, 0.01, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)