IS0QLX-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IS0QLX-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1780326840	1015.1 hPa	27.5 C deg	43.7 %	1015.7 hPa	0 C deg
1780325035	1015.1 hPa	27.5 C deg	43.7 %	1015.7 hPa	0 C deg
1780323213	1015.1 hPa	27.5 C deg	43.7 %	1015.7 hPa	0 C deg
1780321405	1015.1 hPa	27.6 C deg	43.3 %	1015.8 hPa	0 C deg
1779824289	1024.3 hPa	28 C deg	40 %	1025 hPa	0 C deg
1779822475	1024.3 hPa	28.2 C deg	38.3 %	1025 hPa	0 C deg
1779820659	1024.2 hPa	28.4 C deg	37.5 %	1024.9 hPa	0 C deg
1779818854	1024.3 hPa	27.7 C deg	39.6 %	1025 hPa	0 C deg
1779817994	1024.3 hPa	28.5 C deg	37.2 %	1025 hPa	0 C deg
1779816106	1024.3 hPa	28.6 C deg	36.4 %	1025 hPa	0 C deg
1779814297	1024.2 hPa	28.9 C deg	35.6 %	1024.9 hPa	0 C deg
1779812473	1024.3 hPa	29.4 C deg	34.1 %	1025 hPa	0 C deg
1779810654	1024.6 hPa	32.2 C deg	29.1 %	1025.3 hPa	0 C deg
1779808839	1024.5 hPa	26.7 C deg	37.1 %	1025.2 hPa	0 C deg
1779807026	1024.6 hPa	26.7 C deg	37.2 %	1025.3 hPa	0 C deg
1779805211	1024.7 hPa	28.2 C deg	34.9 %	1025.4 hPa	0 C deg
1779803407	1024.9 hPa	27.5 C deg	37 %	1025.6 hPa	0 C deg
1779801579	1025 hPa	27.5 C deg	37.1 %	1025.7 hPa	0 C deg
1779800018	1025.3 hPa	28.9 C deg	35.3 %	1026 hPa	0 C deg
1779799966	1025.3 hPa	28.9 C deg	35.3 %	1026 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)