SR6WXP-0 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR6WXP-0. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Rx10min*	Tx10min*	Digi10min*	Tempre*
1788570957	3 Pkt	3 Pkt	0 Pkt	34.5 DegC
1788569754	4 Pkt	4 Pkt	0 Pkt	34.5 DegC
1788549885	3 Pkt	4 Pkt	0 Pkt	37.5 DegC
1788230768	1 Pkt	3 Pkt	0 Pkt	35 DegC
1788229564	2 Pkt	3 Pkt	0 Pkt	35 DegC
1788228962	4 Pkt	3 Pkt	1 Pkt	35 DegC
1788228362	2 Pkt	4 Pkt	0 Pkt	35 DegC
1788227760	3 Pkt	2 Pkt	0 Pkt	35 DegC
1788225354	2 Pkt	5 Pkt	1 Pkt	35.5 DegC
1788224754	1 Pkt	3 Pkt	0 Pkt	35.5 DegC
1788221135	3 Pkt	4 Pkt	1 Pkt	36 DegC
1788219934	9 Pkt	5 Pkt	1 Pkt	36 DegC
1788219331	8 Pkt	3 Pkt	1 Pkt	36 DegC
1788218731	7 Pkt	3 Pkt	0 Pkt	36 DegC
1788215722	2 Pkt	3 Pkt	0 Pkt	36.5 DegC
1788171771	30 Pkt	7 Pkt	1 Pkt	38.5 DegC
1787899014	5 Pkt	6 Pkt	0 Pkt	34.5 DegC
1787880339	4 Pkt	5 Pkt	0 Pkt	34 DegC
1787879734	2 Pkt	4 Pkt	0 Pkt	34 DegC
1787879131	1 Pkt	2 Pkt	0 Pkt	34 DegC
1787878530	2 Pkt	4 Pkt	0 Pkt	34 DegC
1787877929	1 Pkt	2 Pkt	0 Pkt	34.5 DegC
1787872516	4 Pkt	4 Pkt	1 Pkt	35 DegC
1787870701	1 Pkt	6 Pkt	0 Pkt	35.5 DegC
1787869488	0 Pkt	4 Pkt	0 Pkt	35.5 DegC

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

HostTx10m: 0, 1, 0

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)