EL-DD2ZN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-DD2ZN. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1780419916	0 RX Erlang	0.66 TX Erlang	0 RXcount/10m	19 TXcount/10m
1780418117	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1780417517	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1780416917	0 RX Erlang	0.16 TX Erlang	0 RXcount/10m	16 TXcount/10m
1780416316	0 RX Erlang	0.72 TX Erlang	0 RXcount/10m	81 TXcount/10m
1780414269	0 RX Erlang	0.74 TX Erlang	0 RXcount/10m	34 TXcount/10m
1780340306	0 RX Erlang	0.95 TX Erlang	0 RXcount/10m	12 TXcount/10m
1780339706	0 RX Erlang	0.77 TX Erlang	0 RXcount/10m	13 TXcount/10m
1780339106	0 RX Erlang	0.94 TX Erlang	0 RXcount/10m	11 TXcount/10m
1780338506	0 RX Erlang	0.95 TX Erlang	0 RXcount/10m	8 TXcount/10m
1780337906	0.19 RX Erlang	0.67 TX Erlang	2 RXcount/10m	11 TXcount/10m
1780337306	0.29 RX Erlang	0.56 TX Erlang	9 RXcount/10m	16 TXcount/10m
1780336706	0.07 RX Erlang	0.09 TX Erlang	9 RXcount/10m	9 TXcount/10m
1780336106	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	7 TXcount/10m
1780335506	0 RX Erlang	0.01 TX Erlang	2 RXcount/10m	6 TXcount/10m
1780334986	0.01 RX Erlang	0.01 TX Erlang	2 RXcount/10m	5 TXcount/10m
1780334306	0.04 RX Erlang	0.08 TX Erlang	8 RXcount/10m	21 TXcount/10m
1780333706	0.01 RX Erlang	0.07 TX Erlang	6 RXcount/10m	13 TXcount/10m
1780256320	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	10 TXcount/10m
1780255720	0 RX Erlang	0.66 TX Erlang	0 RXcount/10m	16 TXcount/10m
1780255120	0.37 RX Erlang	0.51 TX Erlang	7 RXcount/10m	20 TXcount/10m
1780254520	0.35 RX Erlang	0.22 TX Erlang	10 RXcount/10m	6 TXcount/10m
1780251362	0.18 RX Erlang	0.06 TX Erlang	20 RXcount/10m	9 TXcount/10m
1780250055	0.1 RX Erlang	0.07 TX Erlang	17 RXcount/10m	21 TXcount/10m
1780249455	0.14 RX Erlang	0.14 TX Erlang	28 RXcount/10m	51 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)