SP7XFF-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP7XFF-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Rx10m*	Eff1h*	EffT*
1753551131	13.8 Volt	430 Pkt	64 Pkt	85 Pcnt	85 Pcnt
1753550531	13.8 Volt	440 Pkt	73 Pkt	87 Pcnt	85 Pcnt
1753549931	13.8 Volt	430 Pkt	74 Pkt	87 Pcnt	85 Pcnt
1753549931	13.8 Volt	430 Pkt	74 Pkt	87 Pcnt	85 Pcnt
1753549331	13.8 Volt	410 Pkt	61 Pkt	87 Pcnt	85 Pcnt
1753548731	13.8 Volt	410 Pkt	56 Pkt	86 Pcnt	85 Pcnt
1753548131	13.88 Volt	400 Pkt	70 Pkt	87 Pcnt	85 Pcnt
1753548131	13.88 Volt	400 Pkt	70 Pkt	87 Pcnt	85 Pcnt
1753547531	13.8 Volt	380 Pkt	66 Pkt	85 Pcnt	85 Pcnt
1753546931	13.8 Volt	380 Pkt	69 Pkt	82 Pcnt	85 Pcnt
1753546331	13.8 Volt	380 Pkt	56 Pkt	80 Pcnt	85 Pcnt
1753546331	13.8 Volt	380 Pkt	56 Pkt	80 Pcnt	85 Pcnt
1753545731	13.8 Volt	410 Pkt	60 Pkt	81 Pcnt	85 Pcnt
1753545131	13.8 Volt	430 Pkt	53 Pkt	83 Pcnt	85 Pcnt
1753544532	13.8 Volt	430 Pkt	51 Pkt	82 Pcnt	85 Pcnt
1753544531	13.8 Volt	430 Pkt	51 Pkt	82 Pcnt	85 Pcnt
1753543931	13.8 Volt	440 Pkt	61 Pkt	84 Pcnt	85 Pcnt
1753543331	13.8 Volt	440 Pkt	72 Pkt	86 Pcnt	85 Pcnt
1753542731	13.8 Volt	430 Pkt	72 Pkt	88 Pcnt	85 Pcnt
1753542731	13.8 Volt	430 Pkt	72 Pkt	88 Pcnt	85 Pcnt
1753542131	13.8 Volt	420 Pkt	79 Pkt	85 Pcnt	85 Pcnt
1753541531	13.8 Volt	400 Pkt	54 Pkt	85 Pcnt	85 Pcnt
1753540931	13.8 Volt	400 Pkt	58 Pkt	86 Pcnt	85 Pcnt
1753540931	13.8 Volt	400 Pkt	58 Pkt	86 Pcnt	85 Pcnt
1753540331	13.8 Volt	400 Pkt	67 Pkt	86 Pcnt	85 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Rx10m: 0, 1, 0

Eff1h: 0, 1, 0

EffT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)