HS2AC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS2AC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*
1780597101	28.94 °C	78.7 %RH	800 hPa	3.88 V
1780596065	28.99 °C	79.6 %RH	800 hPa	3.88 V
1780595029	28.78 °C	81.8 %RH	800 hPa	3.88 V
1780593992	28.66 °C	82.9 %RH	800 hPa	3.89 V
1780592956	28.64 °C	82.8 %RH	800 hPa	3.88 V
1780591920	28.5 °C	84.1 %RH	800 hPa	3.89 V
1780590883	28.35 °C	85.1 %RH	800 hPa	3.89 V
1780589856	28.41 °C	85 %RH	800 hPa	3.89 V
1780589826	28.42 °C	85.2 %RH	800 hPa	3.89 V
1780589458	28.46 °C	84.6 %RH	800 hPa	3.89 V
1780589400	28.43 °C	85.1 %RH	800 hPa	3.9 V
1780588362	28.94 °C	82 %RH	800 hPa	3.89 V
1780588351	28.91 °C	82.1 %RH	800 hPa	3.9 V
1780588317	28.91 °C	81.9 %RH	800 hPa	3.9 V
1780587286	28.64 °C	83.4 %RH	800 hPa	3.89 V
1780586253	28.53 °C	83.9 %RH	800 hPa	3.91 V
1780585221	28.52 °C	83.5 %RH	800 hPa	3.9 V
1780584189	28.68 °C	82.2 %RH	800 hPa	3.9 V
1780583156	28.52 °C	82.5 %RH	800 hPa	3.9 V
1780582124	28.41 °C	83.3 %RH	800 hPa	3.91 V
1780581092	28.48 °C	83.6 %RH	800 hPa	3.91 V
1780580059	28.48 °C	82.6 %RH	800 hPa	3.91 V
1780579027	28.48 °C	82.7 %RH	800 hPa	3.91 V
1780577996	28.99 °C	81.6 %RH	800 hPa	3.91 V
1780576963	29.63 °C	77 %RH	800 hPa	3.92 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)