HS2AC-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS2AC-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RF->INET*	AllCount*
1784737128	3 Pkts	3 Pkts
1784736524	2 Pkts	2 Pkts
1784735924	2 Pkts	2 Pkts
1784735324	3 Pkts	3 Pkts
1784734724	2 Pkts	2 Pkts
1784734124	2 Pkts	2 Pkts
1784733524	3 Pkts	3 Pkts
1784732924	2 Pkts	2 Pkts
1784732324	2 Pkts	2 Pkts
1784731740	3 Pkts	3 Pkts
1784731124	2 Pkts	2 Pkts
1784730524	2 Pkts	2 Pkts
1784729924	3 Pkts	3 Pkts
1784729324	2 Pkts	2 Pkts
1784728724	2 Pkts	2 Pkts
1784728124	3 Pkts	3 Pkts
1784727524	2 Pkts	2 Pkts
1784726924	3 Pkts	3 Pkts
1784726324	3 Pkts	3 Pkts
1784725724	2 Pkts	2 Pkts
1784725124	3 Pkts	3 Pkts
1784724528	3 Pkts	3 Pkts
1784723924	1 Pkts	1 Pkts
1784723324	2 Pkts	2 Pkts
1784722724	3 Pkts	3 Pkts

*Used Equation Coefficients:

RF->INET: 0, 1, 0

INET->RF: 0, 1, 0

Repeater: 0, 1, 0

AllCount: 0, 1, 0

AllDrop: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)