OE5MIL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE5MIL. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Temp*	Dg1h*	Eff1h*
1753528719	10.13 Volt	23 C	50 Pkt	46 Pcnt
1753527503	10.13 Volt	23 C	50 Pkt	51 Pcnt
1753526303	10.13 Volt	23 C	30 Pkt	39 Pcnt
1753525103	10.13 Volt	23 C	30 Pkt	40 Pcnt
1753523903	10.13 Volt	23 C	20 Pkt	30 Pcnt
1753522703	10.13 Volt	23 C	20 Pkt	30 Pcnt
1753521503	10.2 Volt	23 C	20 Pkt	34 Pcnt
1753520303	10.2 Volt	22.5 C	20 Pkt	41 Pcnt
1753519103	10.2 Volt	22 C	20 Pkt	43 Pcnt
1753517903	10.2 Volt	22 C	20 Pkt	36 Pcnt
1753516715	10.2 Volt	21.5 C	20 Pkt	29 Pcnt
1753515503	10.2 Volt	21.5 C	20 Pkt	28 Pcnt
1753514303	10.2 Volt	21.5 C	20 Pkt	36 Pcnt
1753513103	10.2 Volt	21.5 C	20 Pkt	52 Pcnt
1753511903	10.2 Volt	22 C	20 Pkt	84 Pcnt
1753510710	10.2 Volt	22 C	20 Pkt	100 Pcnt
1753509503	10.2 Volt	22 C	20 Pkt	100 Pcnt
1753508303	10.2 Volt	22 C	20 Pkt	100 Pcnt
1753507103	10.2 Volt	22 C	20 Pkt	100 Pcnt
1753505904	10.2 Volt	22 C	20 Pkt	100 Pcnt
1753504704	10.2 Volt	22 C	20 Pkt	95 Pcnt
1753503504	10.2 Volt	22 C	20 Pkt	95 Pcnt
1753502304	10.2 Volt	22 C	20 Pkt	95 Pcnt
1753501104	10.2 Volt	22 C	20 Pkt	100 Pcnt
1753499904	10.2 Volt	22 C	20 Pkt	100 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0.5, -64

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)