SR8JR Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8JR. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1782636002	52 Deg.C	4 %
1782635402	52 Deg.C	4 %
1782634805	52 Deg.C	4 %
1782634202	52 Deg.C	4 %
1782633605	53 Deg.C	4 %
1782633002	52 Deg.C	4 %
1782632405	51 Deg.C	4 %
1782631802	52 Deg.C	4 %
1782631202	51 Deg.C	4 %
1782630605	52 Deg.C	4 %
1782630001	52 Deg.C	4 %
1782629405	50 Deg.C	4 %
1782628801	52 Deg.C	4 %
1782628205	50 Deg.C	4 %
1782627602	51 Deg.C	4 %
1782627001	51 Deg.C	4 %
1782626405	52 Deg.C	4 %
1782625801	52 Deg.C	4 %
1782625205	52 Deg.C	4 %
1782624602	53 Deg.C	4 %
1782624005	52 Deg.C	4 %
1782623402	52 Deg.C	4 %
1782622802	52 Deg.C	4 %
1782622205	52 Deg.C	4 %
1782621602	52 Deg.C	4 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)