N7JVN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N7JVN. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*
1765531909	13.1 Volts	71.85 Deg.F
1765530112	13.13 Volts	72.73 Deg.F
1765528312	13.13 Volts	71.85 Deg.F
1765522921	13.13 Volts	73.61 Deg.F
1765521124	13.13 Volts	73.61 Deg.F
1765519327	13.13 Volts	74.49 Deg.F
1765517530	13.13 Volts	74.49 Deg.F
1765515732	13.13 Volts	75.37 Deg.F
1765513935	13.13 Volts	75.37 Deg.F
1765512138	13.13 Volts	76.25 Deg.F
1765510341	13.1 Volts	76.25 Deg.F
1765508544	13.13 Volts	76.25 Deg.F
1765504950	13.13 Volts	77.13 Deg.F
1765503153	13.13 Volts	77.13 Deg.F
1765501355	13.1 Volts	78.01 Deg.F
1765492370	13.13 Volts	77.13 Deg.F
1765488776	13.1 Volts	77.13 Deg.F
1765479791	13.13 Volts	72.73 Deg.F
1765474402	13.13 Volts	70.09 Deg.F
1765470810	13.13 Volts	67.45 Deg.F
1765467217	13.13 Volts	66.57 Deg.F
1765465420	13.13 Volts	66.57 Deg.F
1765461842	13.13 Volts	66.57 Deg.F
1765460030	13.13 Volts	67.45 Deg.F
1765458233	13.1 Volts	67.45 Deg.F

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.88, -459.67

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)