G5NWH-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object G5NWH-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Voltage*	Celsius*	Rel_Hum*	Atm_Press*
1780894066	3.75 VDC	17.5 C	47.82 %	1014.75 hPa
1780885040	3.8 VDC	17.5 C	47.56 %	1017.25 hPa
1780858842	3.95 VDC	22.9 C	43.68 %	1019.25 hPa
1780848193	4.03 VDC	20.2 C	54.93 %	1020.63 hPa
1780847603	4.03 VDC	20.4 C	54.78 %	1023.25 hPa
1780847142	4.04 VDC	20.6 C	54.94 %	1022.5 hPa
1780846656	4.04 VDC	21 C	54.11 %	1021.13 hPa
1780845351	4.05 VDC	21.3 C	54.91 %	1019.75 hPa
1780834305	4.06 VDC	21.9 C	57.22 %	1021.63 hPa
1780829414	4.07 VDC	19.4 C	60.13 %	1019.88 hPa
1780828303	4.07 VDC	19.2 C	60.7 %	1026.75 hPa
1780827976	4.07 VDC	19.4 C	61.46 %	1026.88 hPa
1780827536	4.07 VDC	19.3 C	61.57 %	1022.13 hPa
1780826896	4.07 VDC	18.8 C	61.1 %	1024.25 hPa
1780826533	4.07 VDC	18.9 C	60.41 %	1025.25 hPa
1780826077	4.07 VDC	19.2 C	60.95 %	1027.25 hPa
1780825568	4.07 VDC	19.4 C	62.05 %	1022.75 hPa
1780824344	4.08 VDC	18.8 C	62.08 %	1026.63 hPa
1780823114	4.08 VDC	18.6 C	61.03 %	1024.13 hPa
1780822698	4.08 VDC	18.6 C	60.85 %	1025.38 hPa
1780822251	4.09 VDC	18.8 C	60.67 %	1023.13 hPa
1780821821	4.09 VDC	19.1 C	59.98 %	1024 hPa
1780821156	4.09 VDC	20.2 C	61.1 %	1024.13 hPa
1780813400	417 VDC	674 C	5956 %	8218 hPa
1780803167	417 VDC	700 C	4893 %	8159 hPa

*Used Equation Coefficients:

Voltage: 0, 0.01, 0

Celsius: 0, 0.1, -50

Rel_Hum: 0, 0.01, 0

Atm_Press: 0, 0.125, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)