K2UNI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K2UNI-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1781389898	270 Pkts	263 Pkts	56 Pkts	60 C
1781386298	272 Pkts	264 Pkts	59 Pkts	60 C
1781382698	262 Pkts	254 Pkts	57 Pkts	60 C
1781379099	283 Pkts	276 Pkts	64 Pkts	60 C
1781375499	267 Pkts	261 Pkts	54 Pkts	60 C
1781371897	314 Pkts	305 Pkts	80 Pkts	60 C
1781368298	263 Pkts	253 Pkts	58 Pkts	60 C
1781364698	261 Pkts	254 Pkts	53 Pkts	60 C
1781361098	310 Pkts	303 Pkts	57 Pkts	60 C
1781357499	314 Pkts	307 Pkts	56 Pkts	60 C
1781353899	297 Pkts	290 Pkts	53 Pkts	60 C
1781350299	281 Pkts	271 Pkts	47 Pkts	60 C
1781346698	269 Pkts	260 Pkts	52 Pkts	60 C
1781343097	268 Pkts	260 Pkts	53 Pkts	60 C
1781339498	271 Pkts	261 Pkts	59 Pkts	60 C
1781335897	243 Pkts	236 Pkts	57 Pkts	60 C
1781332297	253 Pkts	244 Pkts	56 Pkts	61 C
1781328697	232 Pkts	222 Pkts	43 Pkts	61 C
1781325097	210 Pkts	201 Pkts	7 Pkts	61 C
1781321497	211 Pkts	201 Pkts	0 Pkts	61 C
1781317897	216 Pkts	206 Pkts	0 Pkts	60 C
1781314297	248 Pkts	235 Pkts	0 Pkts	60 C
1781310697	226 Pkts	218 Pkts	0 Pkts	60 C
1781307097	229 Pkts	210 Pkts	0 Pkts	60 C
1781303497	202 Pkts	194 Pkts	0 Pkts	60 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)