VK4RBD-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RBD-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	BLDTemp*	Batt*	Rx1h*	DeEff%*	RXpkt*
1761497598	26 C	12.9 Volts	29 Pkt	54 Pkt	41 Spam
1761497294	26 C	12.9 Volts	30 Pkt	55 Pkt	49 Spam
1761496994	26 C	12.9 Volts	29 Pkt	54 Pkt	56 Spam
1761496694	26 C	12.9 Volts	29 Pkt	54 Pkt	55 Spam
1761496394	26 C	12.9 Volts	28 Pkt	53 Pkt	43 Spam
1761496094	26 C	12.96 Volts	28 Pkt	54 Pkt	40 Spam
1761495794	26 C	12.96 Volts	28 Pkt	54 Pkt	53 Spam
1761495494	26.5 C	12.96 Volts	27 Pkt	54 Pkt	40 Spam
1761495194	26.5 C	12.9 Volts	26 Pkt	52 Pkt	38 Spam
1761494894	26.5 C	12.96 Volts	25 Pkt	52 Pkt	49 Spam
1761494594	26.5 C	12.96 Volts	25 Pkt	52 Pkt	38 Spam
1761494302	26.5 C	12.96 Volts	27 Pkt	54 Pkt	47 Spam
1761493994	26.5 C	12.96 Volts	27 Pkt	54 Pkt	36 Spam
1761493694	26.5 C	12.96 Volts	27 Pkt	54 Pkt	43 Spam
1761493394	26.5 C	12.96 Volts	27 Pkt	52 Pkt	49 Spam
1761493099	26.5 C	12.96 Volts	26 Pkt	52 Pkt	44 Spam
1761493094	26.5 C	12.96 Volts	26 Pkt	52 Pkt	44 Spam
1761492794	26.5 C	12.96 Volts	25 Pkt	51 Pkt	43 Spam
1761492494	26.5 C	12.96 Volts	24 Pkt	50 Pkt	32 Spam
1761492194	26.5 C	12.96 Volts	24 Pkt	50 Pkt	31 Spam
1761491594	27 C	12.96 Volts	24 Pkt	49 Pkt	32 Spam
1761491294	27 C	12.96 Volts	23 Pkt	49 Pkt	66 Spam
1761490994	27 C	12.96 Volts	22 Pkt	48 Pkt	53 Spam
1761490694	27 C	12.96 Volts	21 Pkt	46 Pkt	40 Spam
1761490394	27 C	12.96 Volts	20 Pkt	46 Pkt	29 Spam

*Used Equation Coefficients:

BLDTemp: 0, 0.5, -64

Batt: 0, 0.06, 2.7

Rx1h: 0, 1, 0

DeEff%: 0, 1, 0

RXpkt: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)