HB9WNM-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9WNM-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1781855344	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781853529	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781851714	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781849897	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781848080	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781846264	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781844450	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781842633	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781840819	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781839001	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781837188	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781835368	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781833554	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781831740	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781829924	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781828108	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781826298	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781824485	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781822658	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781820844	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781819029	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781817211	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781815397	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781813581	14.8 hPa	0 C deg	1016.7 hPa	0 C deg
1781811764	14.8 hPa	0 C deg	1016.7 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)