SA7NOA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SA7NOA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1789962950	0 Count	852 Count	0 Count	0 VDC	0 VDC
1789962050	0 Count	847 Count	0 Count	0 VDC	0 VDC
1789961150	0 Count	842 Count	0 Count	0 VDC	0 VDC
1789960250	0 Count	837 Count	0 Count	0 VDC	0 VDC
1789959350	0 Count	832 Count	0 Count	0 VDC	0 VDC
1789958450	0 Count	827 Count	0 Count	0 VDC	0 VDC
1789957550	0 Count	822 Count	0 Count	0 VDC	0 VDC
1789956650	0 Count	822 Count	0 Count	0 VDC	0 VDC
1789955750	0 Count	819 Count	0 Count	0 VDC	0 VDC
1789954850	0 Count	811 Count	0 Count	0 VDC	0 VDC
1789953950	0 Count	807 Count	0 Count	0 VDC	0 VDC
1789953050	0 Count	802 Count	0 Count	0 VDC	0 VDC
1789952149	0 Count	798 Count	0 Count	0 VDC	0 VDC
1789951249	0 Count	793 Count	0 Count	0 VDC	0 VDC
1789950349	0 Count	788 Count	0 Count	0 VDC	0 VDC
1789949453	0 Count	784 Count	0 Count	0 VDC	0 VDC
1789948549	0 Count	779 Count	0 Count	0 VDC	0 VDC
1789947649	0 Count	775 Count	0 Count	0 VDC	0 VDC
1789946749	0 Count	769 Count	0 Count	0 VDC	0 VDC
1789945849	0 Count	764 Count	0 Count	0 VDC	0 VDC
1789944949	0 Count	760 Count	0 Count	0 VDC	0 VDC
1789944091	0 Count	755 Count	0 Count	0 VDC	0 VDC
1789943149	0 Count	750 Count	0 Count	0 VDC	0 VDC
1789942249	0 Count	745 Count	0 Count	0 VDC	0 VDC
1789941349	0 Count	741 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)