TA6DDX-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA6DDX-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1765545277	155 Pkt	33 Pkt	7 Pkt	-40 dBm	14.85 V
1765543436	134 Pkt	39 Pkt	6 Pkt	-38 dBm	13.9 V
1765541598	157 Pkt	34 Pkt	16 Pkt	-36 dBm	14.83 V
1765539763	114 Pkt	32 Pkt	14 Pkt	-38 dBm	14.83 V
1765537929	123 Pkt	25 Pkt	21 Pkt	-38 dBm	14.83 V
1765535216	91 Pkt	35 Pkt	9 Pkt	-37 dBm	14.85 V
1765533381	81 Pkt	33 Pkt	11 Pkt	-38 dBm	14.83 V
1765531549	128 Pkt	22 Pkt	14 Pkt	-37 dBm	14.83 V
1765529713	99 Pkt	42 Pkt	10 Pkt	-38 dBm	14.83 V
1765527882	103 Pkt	37 Pkt	7 Pkt	-37 dBm	14.83 V
1765526046	80 Pkt	43 Pkt	1 Pkt	-42 dBm	14.83 V
1765524213	50 Pkt	50 Pkt	0 Pkt	-43 dBm	14.83 V
1765522381	86 Pkt	51 Pkt	1 Pkt	-41 dBm	14.83 V
1765520546	149 Pkt	50 Pkt	1 Pkt	-39 dBm	14.83 V
1765518707	152 Pkt	57 Pkt	2 Pkt	-37 dBm	14.83 V
1765516867	196 Pkt	47 Pkt	4 Pkt	-36 dBm	14.83 V
1765515028	203 Pkt	49 Pkt	2 Pkt	-40 dBm	14.83 V
1765513183	185 Pkt	50 Pkt	4 Pkt	-39 dBm	14.83 V
1765511341	149 Pkt	55 Pkt	1 Pkt	-35 dBm	14.83 V
1765509503	106 Pkt	46 Pkt	3 Pkt	-36 dBm	14.83 V
1765507667	98 Pkt	52 Pkt	1 Pkt	-39 dBm	14.83 V
1765505834	114 Pkt	44 Pkt	3 Pkt	-44 dBm	14.83 V
1765503997	120 Pkt	44 Pkt	18 Pkt	-38 dBm	14.83 V
1765502162	99 Pkt	38 Pkt	21 Pkt	-38 dBm	14.83 V
1765500329	74 Pkt	44 Pkt	20 Pkt	-39 dBm	14.83 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)