XE2J-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2J-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1787558076	12.75 Volt	110 Pkt	50 Pkt	65 Pcnt	25.5 C
1787557177	12.75 Volt	110 Pkt	60 Pkt	69 Pcnt	25.5 C
1787556277	12.75 Volt	100 Pkt	60 Pkt	64 Pcnt	25.5 C
1787555377	12.83 Volt	90 Pkt	50 Pkt	63 Pcnt	25.5 C
1787554477	12.83 Volt	100 Pkt	60 Pkt	65 Pcnt	26 C
1787553577	12.83 Volt	100 Pkt	50 Pkt	62 Pcnt	26 C
1787552677	12.83 Volt	100 Pkt	50 Pkt	60 Pcnt	26 C
1787551777	12.9 Volt	90 Pkt	50 Pkt	58 Pcnt	26 C
1787550877	12.9 Volt	90 Pkt	50 Pkt	59 Pcnt	26.5 C
1787549977	12.9 Volt	90 Pkt	50 Pkt	63 Pcnt	26.5 C
1787549077	12.9 Volt	90 Pkt	50 Pkt	68 Pcnt	26.5 C
1787548177	12.9 Volt	90 Pkt	60 Pkt	70 Pcnt	26.5 C
1787547388	12.98 Volt	80 Pkt	50 Pkt	67 Pcnt	26.5 C
1787546377	12.98 Volt	90 Pkt	60 Pkt	66 Pcnt	26.5 C
1787545477	12.98 Volt	90 Pkt	60 Pkt	68 Pcnt	27 C
1787544577	12.98 Volt	90 Pkt	60 Pkt	69 Pcnt	27 C
1787543677	12.98 Volt	90 Pkt	60 Pkt	70 Pcnt	27.5 C
1787542777	13.05 Volt	90 Pkt	60 Pkt	72 Pcnt	27.5 C
1787541877	13.05 Volt	90 Pkt	50 Pkt	71 Pcnt	28 C
1787540977	13.05 Volt	90 Pkt	50 Pkt	69 Pcnt	28 C
1787540077	13.05 Volt	90 Pkt	50 Pkt	74 Pcnt	28.5 C
1787539177	13.05 Volt	90 Pkt	50 Pkt	71 Pcnt	29 C
1787538277	13.13 Volt	90 Pkt	50 Pkt	69 Pcnt	29.5 C
1787537377	13.13 Volt	90 Pkt	50 Pkt	71 Pcnt	30 C
1787536477	13.13 Volt	90 Pkt	50 Pkt	69 Pcnt	31 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)