DB0BMW Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0BMW. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Batt.*	Temp*	A3*	A4*	A5*
1753549997	14.03 Volt	0 C	0 None	0 None	0 None
1753548797	14.03 Volt	0 C	0 None	0 None	0 None
1753547597	14.03 Volt	0 C	0 None	0 None	0 None
1753546397	14.03 Volt	0 C	0 None	0 None	0 None
1753545197	14.03 Volt	0 C	0 None	0 None	0 None
1753543997	14.03 Volt	0 C	0 None	0 None	0 None
1753542797	14.03 Volt	0 C	0 None	0 None	0 None
1753541597	14.03 Volt	0 C	0 None	0 None	0 None
1753540397	14.03 Volt	0 C	0 None	0 None	0 None
1753539197	14.03 Volt	0 C	0 None	0 None	0 None
1753537997	14.03 Volt	0 C	0 None	0 None	0 None
1753536797	14.03 Volt	0 C	0 None	0 None	0 None
1753535597	14.03 Volt	0 C	0 None	0 None	0 None
1753534397	14.03 Volt	0 C	0 None	0 None	0 None
1753528398	14.03 Volt	0 C	0 None	0 None	0 None
1753527198	14.03 Volt	0 C	0 None	0 None	0 None
1753525998	14.03 Volt	0 C	0 None	0 None	0 None
1753524798	14.03 Volt	0 C	0 None	0 None	0 None
1753523598	14.03 Volt	0 C	0 None	0 None	0 None
1753522398	14.03 Volt	0 C	0 None	0 None	0 None
1753521198	14.03 Volt	0 C	0 None	0 None	0 None
1753519998	13.8 Volt	0 C	0 None	0 None	0 None
1753518798	14.03 Volt	0 C	0 None	0 None	0 None
1753517598	14.03 Volt	0 C	0 None	0 None	0 None
1753516398	14.03 Volt	0 C	0 None	0 None	0 None

*Used Equation Coefficients:

Batt.: 0, 0.075, 0

Temp: 0, 0, 0

A3: 0, 0, 0

A4: 0, 0, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)