EA4GLO-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA4GLO-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkts*	Heard*	RSSI*	SNR*	Vbat*
1785315876	18 Pkt	17 Stn	-114 dBm	-18.8 dB	5 V
1785314976	12 Pkt	16 Stn	-108 dBm	-13 dB	5 V
1785314076	17 Pkt	17 Stn	-114 dBm	-17 dB	5 V
1785313176	16 Pkt	16 Stn	-115 dBm	-18.6 dB	5 V
1785312276	17 Pkt	17 Stn	-114 dBm	-17.4 dB	5 V
1785311376	15 Pkt	16 Stn	-114 dBm	-16.6 dB	5 V
1785310476	23 Pkt	19 Stn	-114 dBm	-16.8 dB	5 V
1785309576	25 Pkt	18 Stn	-114 dBm	-16 dB	5 V
1785308676	21 Pkt	17 Stn	-105 dBm	-8.4 dB	5 V
1785307776	30 Pkt	19 Stn	-114 dBm	-14.4 dB	5 V
1785306876	30 Pkt	18 Stn	-119 dBm	-18.8 dB	5 V
1785305976	17 Pkt	16 Stn	-113 dBm	-14.4 dB	5 V
1785305076	17 Pkt	18 Stn	-114 dBm	-14.4 dB	5 V
1785304176	22 Pkt	17 Stn	-114 dBm	-14.8 dB	5 V
1785303276	15 Pkt	16 Stn	-104 dBm	-5.6 dB	5 V
1785302376	17 Pkt	15 Stn	-115 dBm	-15 dB	5 V
1785301476	16 Pkt	18 Stn	-104 dBm	-5.6 dB	5 V
1785300576	26 Pkt	20 Stn	-113 dBm	-14.4 dB	5 V
1785299676	20 Pkt	16 Stn	-105 dBm	-5.6 dB	5 V
1785298776	20 Pkt	19 Stn	-114 dBm	-14.6 dB	5 V
1785297876	23 Pkt	20 Stn	-104 dBm	-5.8 dB	5 V
1785296976	18 Pkt	16 Stn	-114 dBm	-13.6 dB	5 V
1785296076	20 Pkt	17 Stn	-104 dBm	-6.6 dB	5 V
1785295176	20 Pkt	19 Stn	-107 dBm	-7.4 dB	5 V
1785294276	27 Pkt	18 Stn	-95 dBm	-16.6 dB	5 V

*Used Equation Coefficients:

RxPkts: 0, 1, 0

Heard: 0, 1, 0

RSSI: 0, 1, -150

SNR: 0, 0.2, -20

Vbat: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)