SP7TBU-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP7TBU-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1787580602	53 Deg.C	2 %
1787580005	52 Deg.C	2 %
1787579402	52 Deg.C	2 %
1787578805	52 Deg.C	2 %
1787578202	52 Deg.C	2 %
1787577601	52 Deg.C	2 %
1787577005	53 Deg.C	2 %
1787576401	53 Deg.C	2 %
1787575805	53 Deg.C	2 %
1787575201	53 Deg.C	2 %
1787574605	53 Deg.C	2 %
1787574001	53 Deg.C	2 %
1787573401	53 Deg.C	2 %
1787572805	53 Deg.C	2 %
1787572201	53 Deg.C	2 %
1787571605	53 Deg.C	2 %
1787571002	53 Deg.C	2 %
1787570405	53 Deg.C	2 %
1787569802	52 Deg.C	2 %
1787569201	52 Deg.C	2 %
1787568605	53 Deg.C	2 %
1787568002	53 Deg.C	2 %
1787567405	53 Deg.C	2 %
1787566802	53 Deg.C	2 %
1787566205	52 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)