EA9ABY-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA9ABY-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1781507009	31 Count	35 Count	13 Count	3.93 VDC	0 VDC
1781506466	31 Count	34 Count	12 Count	3.93 VDC	0 VDC
1781506317	31 Count	34 Count	12 Count	3.93 VDC	0 VDC
1781505038	31 Count	33 Count	11 Count	3.93 VDC	0 VDC
1781503238	31 Count	32 Count	10 Count	3.94 VDC	0 VDC
1781501438	31 Count	31 Count	9 Count	3.94 VDC	0 VDC
1781499638	31 Count	30 Count	8 Count	3.95 VDC	0 VDC
1781497838	31 Count	30 Count	8 Count	3.95 VDC	0 VDC
1781496038	31 Count	29 Count	7 Count	3.96 VDC	0 VDC
1781494238	31 Count	28 Count	6 Count	3.98 VDC	0 VDC
1781492438	31 Count	27 Count	5 Count	3.99 VDC	0 VDC
1781490637	31 Count	26 Count	4 Count	3.99 VDC	0 VDC
1781489658	29 Count	24 Count	3 Count	3.95 VDC	0 VDC
1781489543	28 Count	23 Count	3 Count	3.95 VDC	0 VDC
1781489091	27 Count	22 Count	3 Count	3.99 VDC	0 VDC
1781488300	25 Count	20 Count	2 Count	3.81 VDC	0 VDC
1781488155	24 Count	19 Count	2 Count	3.85 VDC	0 VDC
1781487804	23 Count	18 Count	2 Count	3.85 VDC	0 VDC
1781487582	22 Count	17 Count	2 Count	3.83 VDC	0 VDC
1781487089	21 Count	16 Count	2 Count	3.85 VDC	0 VDC
1781486444	20 Count	16 Count	2 Count	3.85 VDC	0 VDC
1781485681	19 Count	16 Count	2 Count	3.85 VDC	0 VDC
1781484645	18 Count	16 Count	2 Count	3.85 VDC	0 VDC
1781483572	16 Count	14 Count	2 Count	3.86 VDC	0 VDC
1781482983	15 Count	13 Count	2 Count	3.85 VDC	0.08 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)