PP1MRB-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PP1MRB-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1782120779	13.73 Volt	120 Pkt	20 Pkt	96 Pcnt
1782117176	13.73 Volt	120 Pkt	20 Pkt	100 Pcnt
1782113572	13.73 Volt	120 Pkt	20 Pkt	99 Pcnt
1782109969	13.73 Volt	120 Pkt	20 Pkt	97 Pcnt
1782106365	13.73 Volt	120 Pkt	20 Pkt	97 Pcnt
1782102762	13.73 Volt	130 Pkt	20 Pkt	99 Pcnt
1782099158	13.73 Volt	130 Pkt	20 Pkt	97 Pcnt
1782095555	13.73 Volt	110 Pkt	20 Pkt	96 Pcnt
1782091951	13.73 Volt	100 Pkt	20 Pkt	86 Pcnt
1782088348	13.73 Volt	120 Pkt	20 Pkt	93 Pcnt
1782084744	13.73 Volt	110 Pkt	20 Pkt	91 Pcnt
1782081141	13.73 Volt	90 Pkt	20 Pkt	73 Pcnt
1782077537	13.73 Volt	110 Pkt	20 Pkt	85 Pcnt
1782073934	13.73 Volt	100 Pkt	10 Pkt	81 Pcnt
1782070330	13.73 Volt	120 Pkt	20 Pkt	98 Pcnt
1782066727	13.73 Volt	100 Pkt	20 Pkt	100 Pcnt
1782063183	13.73 Volt	0 Pkt	0 Pkt	100 Pcnt
1782062994	13.73 Volt	10 Pkt	0 Pkt	94 Pcnt
1782060808	13.73 Volt	110 Pkt	20 Pkt	95 Pcnt
1782057205	13.73 Volt	80 Pkt	10 Pkt	97 Pcnt
1782053601	13.73 Volt	80 Pkt	10 Pkt	97 Pcnt
1782049998	13.73 Volt	120 Pkt	20 Pkt	98 Pcnt
1782046394	13.73 Volt	70 Pkt	10 Pkt	98 Pcnt
1782042791	13.73 Volt	30 Pkt	0 Pkt	78 Pcnt
1782039187	13.73 Volt	100 Pkt	10 Pkt	99 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)