YC1SNI Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YC1SNI. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp.*	Humidity*	Voltage*
1787686845	29 °C	70 %RH	4 V
1787685089	29 °C	69 %RH	4 V
1787683335	29 °C	68 %RH	4 V
1787683323	29 °C	68 %RH	4 V
1787682327	29 °C	67 %RH	4 V
1787680572	29 °C	66 %RH	4 V
1787678817	29 °C	63 %RH	4 V
1787677062	29 °C	59 %RH	4 V
1787675307	27 °C	56 %RH	4 V
1787673552	27 °C	57 %RH	4 V
1787671797	27 °C	57 %RH	4 V
1787670042	27 °C	58 %RH	4 V
1787668287	27 °C	59 %RH	4 V
1787666531	28 °C	59 %RH	4 V
1787664776	28 °C	60 %RH	4 V
1787663130	29 °C	62 %RH	4 V
1787661375	29 °C	58 %RH	4 V
1787659621	28 °C	57 %RH	4 V
1787657865	29 °C	57 %RH	4 V
1787656096	30 °C	60 %RH	4 V
1787655186	30 °C	61 %RH	4 V
1787653431	30 °C	63 %RH	3 V
1787653417	30 °C	64 %RH	3 V
1787652869	31 °C	64 %RH	3 V
1787652590	32 °C	62 %RH	2 V

*Used Equation Coefficients:

Temp.: 0, 1, 0

Humidity: 0, 1, 0

Voltage: 0, 1, 0

Current: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)