KK5CM-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KK5CM-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Room*
1780893607	13.58 Volt	670 Pkt	160 Pkt	85 Pcnt	24.5 C
1780893318	13.58 Volt	660 Pkt	150 Pkt	86 Pcnt	24.5 C
1780893307	13.58 Volt	660 Pkt	150 Pkt	86 Pcnt	24.5 C
1780893007	13.5 Volt	650 Pkt	150 Pkt	86 Pcnt	24.5 C
1780892713	13.58 Volt	640 Pkt	140 Pkt	86 Pcnt	24.5 C
1780892707	13.58 Volt	640 Pkt	140 Pkt	86 Pcnt	24.5 C
1780892407	13.58 Volt	620 Pkt	140 Pkt	87 Pcnt	24 C
1780892109	13.58 Volt	610 Pkt	140 Pkt	88 Pcnt	24 C
1780892107	13.58 Volt	610 Pkt	140 Pkt	88 Pcnt	24 C
1780891807	13.58 Volt	600 Pkt	130 Pkt	88 Pcnt	24 C
1780891508	13.58 Volt	590 Pkt	140 Pkt	88 Pcnt	24 C
1780891507	13.58 Volt	590 Pkt	140 Pkt	88 Pcnt	24 C
1780891207	13.58 Volt	590 Pkt	130 Pkt	88 Pcnt	24 C
1780890908	13.58 Volt	580 Pkt	130 Pkt	88 Pcnt	24 C
1780890907	13.58 Volt	580 Pkt	130 Pkt	88 Pcnt	24 C
1780890607	13.58 Volt	560 Pkt	130 Pkt	89 Pcnt	24 C
1780890309	13.58 Volt	570 Pkt	130 Pkt	89 Pcnt	24 C
1780890307	13.58 Volt	570 Pkt	130 Pkt	89 Pcnt	24 C
1780890007	13.58 Volt	550 Pkt	130 Pkt	89 Pcnt	24 C
1780889718	13.58 Volt	540 Pkt	130 Pkt	89 Pcnt	24 C
1780889707	13.58 Volt	540 Pkt	130 Pkt	89 Pcnt	24 C
1780889407	13.58 Volt	550 Pkt	140 Pkt	89 Pcnt	24 C
1780889108	13.58 Volt	550 Pkt	140 Pkt	88 Pcnt	24 C
1780889107	13.58 Volt	550 Pkt	140 Pkt	88 Pcnt	24 C
1780888807	13.58 Volt	540 Pkt	140 Pkt	88 Pcnt	24.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Room: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)