LU7FDV-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU7FDV-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1782042379	0 Count	30 Count	0 Count	0 VDC	0 VDC
1782041779	0 Count	29 Count	0 Count	0 VDC	0 VDC
1782041184	0 Count	28 Count	0 Count	0 VDC	0 VDC
1782040584	0 Count	28 Count	0 Count	0 VDC	0 VDC
1782039984	0 Count	27 Count	0 Count	0 VDC	0 VDC
1782039384	0 Count	26 Count	0 Count	0 VDC	0 VDC
1782038784	0 Count	26 Count	0 Count	0 VDC	0 VDC
1782038183	0 Count	25 Count	0 Count	0 VDC	0 VDC
1782037583	0 Count	24 Count	0 Count	0 VDC	0 VDC
1782036983	0 Count	24 Count	0 Count	0 VDC	0 VDC
1782036383	0 Count	23 Count	0 Count	0 VDC	0 VDC
1782035783	0 Count	22 Count	0 Count	0 VDC	0 VDC
1782035183	0 Count	22 Count	0 Count	0 VDC	0 VDC
1782034582	0 Count	21 Count	0 Count	0 VDC	0 VDC
1782033982	0 Count	20 Count	0 Count	0 VDC	0 VDC
1782033382	0 Count	20 Count	0 Count	0 VDC	0 VDC
1782032782	0 Count	19 Count	0 Count	0 VDC	0 VDC
1782032182	0 Count	18 Count	0 Count	0 VDC	0 VDC
1782031582	0 Count	18 Count	0 Count	0 VDC	0 VDC
1782030981	0 Count	17 Count	0 Count	0 VDC	0 VDC
1782030381	0 Count	16 Count	0 Count	0 VDC	0 VDC
1782029781	0 Count	16 Count	0 Count	0 VDC	0 VDC
1782029180	0 Count	10 Count	0 Count	0 VDC	0 VDC
1782028580	0 Count	9 Count	0 Count	0 VDC	0 VDC
1782027980	0 Count	9 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)