YC2SNK-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YC2SNK-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp.*	Hummidity*	Pressure*
1787574923	36 °C	33 %RH	1001 hPa
1787573123	37 °C	32 %RH	1000 hPa
1787571323	37 °C	32 %RH	1000 hPa
1787569523	37 °C	32 %RH	999 hPa
1787567723	36 °C	32 %RH	999 hPa
1787565923	35 °C	32 %RH	999 hPa
1787564123	35 °C	31 %RH	998 hPa
1787562323	35 °C	31 %RH	998 hPa
1787560523	35 °C	32 %RH	998 hPa
1787558723	35 °C	33 %RH	998 hPa
1787557039	35 °C	35 %RH	998 hPa
1787555123	35 °C	35 %RH	999 hPa
1787553323	35 °C	35 %RH	999 hPa
1787551523	35 °C	35 %RH	1000 hPa
1787549723	35 °C	35 %RH	1000 hPa
1787547923	35 °C	36 %RH	1001 hPa
1787546123	35 °C	37 %RH	1001 hPa
1787544323	34 °C	37 %RH	1002 hPa
1787542523	34 °C	37 %RH	1003 hPa
1787540723	34 °C	37 %RH	1003 hPa
1787538923	34 °C	38 %RH	1004 hPa
1787537123	34 °C	37 %RH	1004 hPa
1787535323	34 °C	37 %RH	1004 hPa
1787533523	35 °C	37 %RH	1004 hPa
1787531866	35 °C	38 %RH	1003 hPa

*Used Equation Coefficients:

Temp.: 0, 1, 0

Hummidity: 0, 1, 0

Pressure: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)