KN4TPG-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KN4TPG-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Humid*	Press*	CO2*	PM25*
1781976381	72 degF	48 Pct	1015 mb	460 ppm	1 ugm3
1781976201	72 degF	48 Pct	1015 mb	470 ppm	0 ugm3
1781976021	73 degF	47 Pct	1015 mb	470 ppm	1 ugm3
1781975839	73 degF	47 Pct	1015 mb	470 ppm	0 ugm3
1781975659	73 degF	47 Pct	1015 mb	460 ppm	0 ugm3
1781975478	73 degF	47 Pct	1015 mb	460 ppm	0 ugm3
1781975299	73 degF	47 Pct	1015 mb	460 ppm	1 ugm3
1781975118	72 degF	48 Pct	1015 mb	460 ppm	1 ugm3
1781974938	73 degF	47 Pct	1015 mb	460 ppm	0 ugm3
1781974757	73 degF	47 Pct	1015 mb	470 ppm	1 ugm3
1781974576	73 degF	47 Pct	1015 mb	480 ppm	0 ugm3
1781974442	72 degF	48 Pct	1015 mb	470 ppm	1 ugm3
1781974215	71 degF	49 Pct	1015 mb	470 ppm	1 ugm3
1781974036	71 degF	50 Pct	1015 mb	460 ppm	1 ugm3
1781973853	71 degF	50 Pct	1015 mb	460 ppm	0 ugm3
1781973673	71 degF	50 Pct	1015 mb	460 ppm	1 ugm3
1781973312	71 degF	50 Pct	1015 mb	460 ppm	1 ugm3
1781973131	72 degF	49 Pct	1015 mb	470 ppm	1 ugm3
1781972952	71 degF	50 Pct	1015 mb	460 ppm	64 ugm3
1781972770	71 degF	50 Pct	1015 mb	470 ppm	0 ugm3
1781972590	71 degF	50 Pct	1015 mb	480 ppm	1 ugm3
1781972411	71 degF	50 Pct	1015 mb	460 ppm	0 ugm3
1781972229	70 degF	51 Pct	1015 mb	460 ppm	0 ugm3
1781972049	70 degF	51 Pct	1015 mb	460 ppm	0 ugm3
1781971868	70 degF	51 Pct	1015 mb	460 ppm	0 ugm3

*Used Equation Coefficients:

Temp: 0, 1, 0

Humid: 0, 1, 0

Press: 0, 1, 900

CO2: 0, 10, 0

PM25: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)