IZ0PMP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ0PMP-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788566856	14.46 Volt	480 Pkt	190 Pkt	64 Pcnt
1788565054	14.46 Volt	510 Pkt	200 Pkt	65 Pcnt
1788563252	14.14 Volt	490 Pkt	190 Pkt	64 Pcnt
1788561452	14.46 Volt	530 Pkt	200 Pkt	62 Pcnt
1788559649	14.46 Volt	530 Pkt	190 Pkt	65 Pcnt
1788557847	14.46 Volt	480 Pkt	160 Pkt	64 Pcnt
1788556045	14.46 Volt	460 Pkt	180 Pkt	61 Pcnt
1788554243	14.46 Volt	460 Pkt	190 Pkt	62 Pcnt
1788552442	14.46 Volt	520 Pkt	180 Pkt	66 Pcnt
1788550639	14.46 Volt	570 Pkt	190 Pkt	66 Pcnt
1788548838	14.46 Volt	610 Pkt	220 Pkt	63 Pcnt
1788547037	14.46 Volt	560 Pkt	230 Pkt	64 Pcnt
1788545234	14.46 Volt	590 Pkt	250 Pkt	66 Pcnt
1788543433	14.46 Volt	730 Pkt	290 Pkt	68 Pcnt
1788541630	14.46 Volt	700 Pkt	270 Pkt	71 Pcnt
1788539831	14.46 Volt	610 Pkt	250 Pkt	69 Pcnt
1788538028	14.06 Volt	570 Pkt	240 Pkt	62 Pcnt
1788536226	14.46 Volt	550 Pkt	230 Pkt	60 Pcnt
1788534424	14.14 Volt	600 Pkt	260 Pkt	63 Pcnt
1788532622	14.46 Volt	630 Pkt	280 Pkt	67 Pcnt
1788530820	14.46 Volt	610 Pkt	260 Pkt	68 Pcnt
1788529018	14.46 Volt	560 Pkt	230 Pkt	65 Pcnt
1788527217	14.46 Volt	520 Pkt	210 Pkt	64 Pcnt
1788525415	14.46 Volt	580 Pkt	220 Pkt	67 Pcnt
1788523613	14.46 Volt	650 Pkt	240 Pkt	69 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)