F1ZRP-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F1ZRP-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Tint*	Hint*	RxPkts*	TxPkts*
1753618717	22.9 C	63.8 %	0 Count	6 Count
1753616916	22.8 C	63.7 %	0 Count	6 Count
1753611515	22.7 C	63.8 %	0 Count	6 Count
1753607915	22.6 C	63.5 %	0 Count	6 Count
1753606114	22.7 C	63.5 %	0 Count	6 Count
1753604314	22.7 C	63.6 %	0 Count	6 Count
1753602514	22.8 C	63.8 %	0 Count	6 Count
1753600713	22.7 C	63.8 %	0 Count	6 Count
1753598913	22.7 C	63.8 %	0 Count	5 Count
1753572988	23.1 C	64.3 %	0 Count	6 Count
1753571188	23.1 C	64.3 %	0 Count	6 Count
1753569387	23.1 C	64.3 %	0 Count	6 Count
1753567587	23.1 C	64.3 %	2 Count	6 Count
1753564891	23.1 C	64.4 %	0 Count	6 Count
1753563090	23.1 C	64.3 %	0 Count	6 Count
1753561290	23.1 C	64.3 %	0 Count	6 Count
1753559490	23.1 C	64.3 %	0 Count	6 Count
1753557690	23.1 C	64.3 %	0 Count	6 Count
1753555890	23.1 C	64.3 %	0 Count	6 Count
1753554089	23.1 C	64.3 %	0 Count	6 Count
1753552289	23 C	64.2 %	0 Count	6 Count
1753550489	23 C	64.3 %	0 Count	6 Count
1753548689	23 C	64.3 %	0 Count	6 Count
1753546889	22.9 C	64.3 %	0 Count	6 Count
1753545088	22.9 C	64.5 %	0 Count	6 Count

*Used Equation Coefficients:

Tint: 0, 1, 0

Hint: 0, 1, 0

RxPkts: 0, 1, 0

TxPkts: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)