VK6KCH-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK6KCH-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	30m_APRS*	Uptime*	CPU_Temp*	JT9_Processes*	Swap*
1784710237	1 pkts_in_hr	149 hours	55.67 degC	0	216 MiB
1784709937	1 pkts_in_hr	149 hours	58 degC	0	216 MiB
1784709625	1 pkts_in_hr	149 hours	57.67 degC	2	220 MiB
1784709340	1 pkts_in_hr	149 hours	52 degC	0	220 MiB
1784709040	1 pkts_in_hr	149 hours	60.67 degC	2	220 MiB
1784708725	0 pkts_in_hr	149 hours	52.67 degC	0	220 MiB
1784708436	0 pkts_in_hr	149 hours	56.33 degC	0	220 MiB
1784708136	0 pkts_in_hr	149 hours	58 degC	2	220 MiB
1784707825	0 pkts_in_hr	148 hours	57.67 degC	2	220 MiB
1784707540	0 pkts_in_hr	148 hours	51.67 degC	0	220 MiB
1784707240	0 pkts_in_hr	148 hours	60.67 degC	4	220 MiB
1784706925	0 pkts_in_hr	148 hours	53.67 degC	0	220 MiB
1784706636	0 pkts_in_hr	148 hours	55.67 degC	0	220 MiB
1784706337	0 pkts_in_hr	148 hours	57 degC	0	220 MiB
1784706026	0 pkts_in_hr	148 hours	57 degC	2	220 MiB
1784705738	0 pkts_in_hr	148 hours	51 degC	0	220 MiB
1784705438	0 pkts_in_hr	148 hours	60 degC	0	220 MiB
1784705125	0 pkts_in_hr	148 hours	53.33 degC	0	232 MiB
1784704839	0 pkts_in_hr	148 hours	58.67 degC	2	232 MiB
1784704539	0 pkts_in_hr	148 hours	59 degC	0	232 MiB
1784704228	0 pkts_in_hr	147 hours	58 degC	2	232 MiB
1784703938	0 pkts_in_hr	147 hours	52 degC	0	232 MiB
1784703638	0 pkts_in_hr	147 hours	60 degC	0	220 MiB
1784703325	0 pkts_in_hr	147 hours	53.67 degC	0	220 MiB
1784703038	0 pkts_in_hr	147 hours	57 degC	2	220 MiB

*Used Equation Coefficients:

30m_APRS: 0, 1, 0

Uptime: 0, 1, 0

CPU_Temp: 0, 0.333333, 0

JT9_Processes: 0, 1, 0

Swap: 0, 4, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)