This is the latest recevied telemetry packets stored in our database for station/object SR9WXP-0. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Rx10min*
Visc10min*
Digi10min*
Vbatt*
Tempre*
1782605807
81 Pkt
0 Pkt
6 Pkt
14 V
28.5 DegC
1782605197
60 Pkt
2 Pkt
4 Pkt
14 V
28.5 DegC
1782604597
60 Pkt
0 Pkt
2 Pkt
13.96 V
28.5 DegC
1782603997
86 Pkt
0 Pkt
2 Pkt
14 V
29 DegC
1782600396
86 Pkt
1 Pkt
7 Pkt
13.78 V
29.5 DegC
1782599796
85 Pkt
2 Pkt
4 Pkt
13.7 V
29.5 DegC
1782599196
74 Pkt
3 Pkt
2 Pkt
13.62 V
29.5 DegC
1782598596
69 Pkt
0 Pkt
3 Pkt
13.56 V
29 DegC
1782597996
65 Pkt
1 Pkt
3 Pkt
13.48 V
29 DegC
1782592583
84 Pkt
2 Pkt
3 Pkt
12.38 V
25.5 DegC
1782591383
109 Pkt
1 Pkt
9 Pkt
12.4 V
26 DegC
1782590183
81 Pkt
1 Pkt
3 Pkt
12.42 V
26.5 DegC
1782589583
100 Pkt
3 Pkt
5 Pkt
12.4 V
27 DegC
1782588382
81 Pkt
1 Pkt
7 Pkt
12.44 V
28 DegC
1782579364
99 Pkt
0 Pkt
7 Pkt
12.48 V
32 DegC
1782578786
109 Pkt
1 Pkt
9 Pkt
12.52 V
32 DegC
1782578164
99 Pkt
2 Pkt
7 Pkt
12.52 V
32 DegC
*Used Equation Coefficients:
Rx10min: 0, 1, 0
Visc10min: 0, 1, 0
Digi10min: 0, 1, 0
Vbatt: 0, 0.02, 10
Tempre: 0, 0.5, -50
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)