TA3Q-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3Q-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1789946020	10 Pkt	41 Pkt	0 Pkt	-69 dBm	11.81 V
1789945397	9 Pkt	48 Pkt	0 Pkt	-69 dBm	11.81 V
1789944787	11 Pkt	40 Pkt	0 Pkt	-72 dBm	11.81 V
1789944177	10 Pkt	49 Pkt	0 Pkt	-72 dBm	11.81 V
1789943567	10 Pkt	49 Pkt	0 Pkt	-68 dBm	11.81 V
1789942957	6 Pkt	41 Pkt	2 Pkt	-68 dBm	11.81 V
1789942347	10 Pkt	49 Pkt	0 Pkt	-67 dBm	11.81 V
1789941737	9 Pkt	51 Pkt	0 Pkt	-69 dBm	11.81 V
1789941127	9 Pkt	48 Pkt	0 Pkt	-68 dBm	11.81 V
1789940517	11 Pkt	46 Pkt	0 Pkt	-69 dBm	11.81 V
1789939907	10 Pkt	54 Pkt	0 Pkt	-68 dBm	11.81 V
1789939297	12 Pkt	45 Pkt	0 Pkt	-67 dBm	11.81 V
1789938687	11 Pkt	56 Pkt	1 Pkt	-68 dBm	11.81 V
1789938108	9 Pkt	53 Pkt	0 Pkt	-68 dBm	11.81 V
1789937467	13 Pkt	46 Pkt	0 Pkt	-70 dBm	11.81 V
1789936857	10 Pkt	52 Pkt	0 Pkt	-69 dBm	11.81 V
1789936247	8 Pkt	49 Pkt	0 Pkt	-67 dBm	11.81 V
1789935637	10 Pkt	60 Pkt	0 Pkt	-67 dBm	11.81 V
1789935027	8 Pkt	60 Pkt	0 Pkt	-68 dBm	11.81 V
1789934417	10 Pkt	52 Pkt	0 Pkt	-68 dBm	11.81 V
1789933807	7 Pkt	49 Pkt	0 Pkt	-66 dBm	11.81 V
1789933197	4 Pkt	59 Pkt	0 Pkt	-68 dBm	11.81 V
1789932587	5 Pkt	47 Pkt	0 Pkt	-70 dBm	11.81 V
1789931977	9 Pkt	54 Pkt	1 Pkt	-67 dBm	11.81 V
1789931367	6 Pkt	49 Pkt	1 Pkt	-70 dBm	11.81 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)