DO6TA-0 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DO6TA-0. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1784593097	984.9 hPa	31.7 C deg	1020.5 hPa	0 C deg
1784591290	985 hPa	31.8 C deg	1020.6 hPa	0 C deg
1784589443	985 hPa	31.9 C deg	1020.6 hPa	0 C deg
1784587606	985 hPa	31.9 C deg	1020.6 hPa	0 C deg
1784585775	985 hPa	32.1 C deg	1020.6 hPa	0 C deg
1784583946	985 hPa	32.2 C deg	1020.6 hPa	0 C deg
1784582117	984.8 hPa	31.7 C deg	1020.4 hPa	0 C deg
1784580286	984.7 hPa	31.5 C deg	1020.3 hPa	0 C deg
1784578455	984.5 hPa	31.3 C deg	1020.2 hPa	0 C deg
1784576632	984.4 hPa	30.9 C deg	1020.1 hPa	0 C deg
1784574797	984.1 hPa	31.1 C deg	1019.8 hPa	0 C deg
1784572972	984 hPa	31 C deg	1019.6 hPa	0 C deg
1784571152	984 hPa	31.6 C deg	1019.6 hPa	0 C deg
1784569305	983.8 hPa	31.9 C deg	1019.3 hPa	0 C deg
1784567481	983.6 hPa	32.8 C deg	1019.1 hPa	0 C deg
1784565642	983.6 hPa	32.8 C deg	1019.1 hPa	0 C deg
1784563825	983.6 hPa	32.7 C deg	1019 hPa	0 C deg
1784561991	983.6 hPa	32.7 C deg	1019 hPa	0 C deg
1784560165	983.5 hPa	32.7 C deg	1019 hPa	0 C deg
1784558347	983.6 hPa	32.7 C deg	1019 hPa	0 C deg
1784556491	983.7 hPa	32.8 C deg	1019.1 hPa	0 C deg
1784554670	983.6 hPa	32.6 C deg	1019 hPa	0 C deg
1784552843	983.5 hPa	32.6 C deg	1018.9 hPa	0 C deg
1784551008	983.5 hPa	32.6 C deg	1018.9 hPa	0 C deg
1784549175	983.5 hPa	32.6 C deg	1019 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)