KK7FIU-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KK7FIU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Tempf*
1780574877	12.98 Volt	230 Pkt	89 Pcnt	72 F
1780574577	12.98 Volt	230 Pkt	87 Pcnt	72 F
1780574277	12.98 Volt	240 Pkt	86 Pcnt	72 F
1780573977	12.98 Volt	240 Pkt	83 Pcnt	72 F
1780573677	12.98 Volt	230 Pkt	81 Pcnt	72 F
1780573377	12.98 Volt	240 Pkt	80 Pcnt	72 F
1780573077	12.98 Volt	240 Pkt	77 Pcnt	72.5 F
1780572777	12.98 Volt	240 Pkt	75 Pcnt	72.5 F
1780572477	12.98 Volt	240 Pkt	76 Pcnt	72.5 F
1780572177	12.98 Volt	230 Pkt	75 Pcnt	72.5 F
1780571877	12.98 Volt	230 Pkt	74 Pcnt	72.5 F
1780571577	12.98 Volt	230 Pkt	74 Pcnt	72.5 F
1780571277	12.98 Volt	230 Pkt	74 Pcnt	72.5 F
1780570977	12.98 Volt	240 Pkt	75 Pcnt	72.5 F
1780570677	12.98 Volt	240 Pkt	75 Pcnt	72.5 F
1780570377	12.98 Volt	240 Pkt	74 Pcnt	72.5 F
1780570077	12.98 Volt	240 Pkt	74 Pcnt	72.5 F
1780569777	12.98 Volt	240 Pkt	73 Pcnt	72.5 F
1780569477	12.98 Volt	240 Pkt	74 Pcnt	72.5 F
1780569177	12.98 Volt	240 Pkt	73 Pcnt	72.5 F
1780568877	12.98 Volt	240 Pkt	73 Pcnt	72.5 F
1780568577	12.98 Volt	240 Pkt	73 Pcnt	72.5 F
1780568277	12.98 Volt	250 Pkt	74 Pcnt	72.5 F
1780567977	12.98 Volt	240 Pkt	73 Pcnt	72.5 F
1780567677	12.98 Volt	250 Pkt	74 Pcnt	72.5 F

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Tempf: 0, 0.5, -10

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)