EL-PY5MU Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-PY5MU. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1789940359	0.2 RX Erlang	0.37 TX Erlang	3 RXcount/10m	11 TXcount/10m
1789939759	0.25 RX Erlang	0.63 TX Erlang	6 RXcount/10m	17 TXcount/10m
1789939159	0.03 RX Erlang	0.92 TX Erlang	1 RXcount/10m	9 TXcount/10m
1789938559	0.02 RX Erlang	0.89 TX Erlang	1 RXcount/10m	12 TXcount/10m
1789937959	0.03 RX Erlang	0.87 TX Erlang	1 RXcount/10m	15 TXcount/10m
1789937359	0.02 RX Erlang	0.89 TX Erlang	1 RXcount/10m	10 TXcount/10m
1789936759	0.1 RX Erlang	0.78 TX Erlang	4 RXcount/10m	15 TXcount/10m
1789936159	0.2 RX Erlang	0.52 TX Erlang	4 RXcount/10m	15 TXcount/10m
1789935559	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1789934959	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1789934359	0.01 RX Erlang	0 TX Erlang	1 RXcount/10m	1 TXcount/10m
1789933759	0 RX Erlang	0.01 TX Erlang	1 RXcount/10m	3 TXcount/10m
1789933159	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	3 TXcount/10m
1789932559	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1789931959	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1789931359	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1789930759	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1789930167	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1789929559	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	4 TXcount/10m
1789928959	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1789928359	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	3 TXcount/10m
1789927759	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1789927159	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1789926559	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1789925959	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	4 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)