DJ1FC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DJ1FC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1784701317	0 Count	66 Count	0 Count	0 VDC	0 VDC
1784700117	0 Count	64 Count	0 Count	0 VDC	0 VDC
1784698917	0 Count	60 Count	0 Count	0 VDC	0 VDC
1784697717	0 Count	59 Count	0 Count	0 VDC	0 VDC
1784696517	0 Count	56 Count	0 Count	0 VDC	0 VDC
1784695317	0 Count	54 Count	0 Count	0 VDC	0 VDC
1784694117	0 Count	48 Count	0 Count	0 VDC	0 VDC
1784692919	0 Count	33 Count	0 Count	0 VDC	0 VDC
1784691719	0 Count	26 Count	0 Count	0 VDC	0 VDC
1784690518	0 Count	23 Count	0 Count	0 VDC	0 VDC
1784689318	0 Count	19 Count	0 Count	0 VDC	0 VDC
1784688118	0 Count	13 Count	0 Count	0 VDC	0 VDC
1784686918	0 Count	9 Count	0 Count	0 VDC	0 VDC
1784685718	0 Count	5 Count	0 Count	0 VDC	0 VDC
1784684518	0 Count	1003 Count	0 Count	0 VDC	0 VDC
1784683318	0 Count	998 Count	0 Count	0 VDC	0 VDC
1784682118	0 Count	994 Count	0 Count	0 VDC	0 VDC
1784680918	0 Count	990 Count	0 Count	0 VDC	0 VDC
1784678517	0 Count	982 Count	0 Count	0 VDC	0 VDC
1784677316	0 Count	975 Count	0 Count	0 VDC	0 VDC
1784676116	0 Count	969 Count	0 Count	0 VDC	0 VDC
1784674916	0 Count	965 Count	0 Count	0 VDC	0 VDC
1784673716	0 Count	958 Count	0 Count	0 VDC	0 VDC
1784672516	0 Count	953 Count	0 Count	0 VDC	0 VDC
1784671315	0 Count	950 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)