F5OPV-P0 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F5OPV-P0. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbat*	Temp*	RH*	Patm*	Lum.*
1784701304	5.22 volts	22.5 C	71 %	1126 hPa	16 %
1784700003	5.22 volts	23.6 C	71 %	1129 hPa	3 %
1784698703	5.22 volts	23.6 C	71 %	1129 hPa	1 %
1784697403	5.22 volts	23.7 C	71 %	1129 hPa	1 %
1784696103	5.22 volts	23.9 C	71 %	1130 hPa	0 %
1784694803	5.22 volts	24 C	71 %	1130 hPa	0 %
1784688302	5.22 volts	24.8 C	71 %	1133 hPa	0 %
1784685702	5.24 volts	25.1 C	71 %	1134 hPa	0 %
1784684402	5.23 volts	25.3 C	71 %	1135 hPa	0 %
1784683102	5.24 volts	25.4 C	71 %	1136 hPa	0 %
1784681801	5.23 volts	25.6 C	70 %	1136 hPa	0 %
1784680501	5.23 volts	25.7 C	70 %	1137 hPa	0 %
1784679201	5.24 volts	25.9 C	71 %	1138 hPa	0 %
1784677901	5.22 volts	26 C	71 %	1138 hPa	0 %
1784676601	5.24 volts	26.1 C	70 %	1139 hPa	0 %
1784674001	5.24 volts	26.4 C	71 %	1141 hPa	0 %
1784672700	5.24 volts	26.5 C	70 %	1141 hPa	0 %
1784670100	5.24 volts	26.8 C	70 %	1143 hPa	0 %
1784664899	5.24 volts	27.5 C	70 %	1147 hPa	0 %
1784663599	5.24 volts	27.6 C	70 %	1148 hPa	1 %
1784662299	5.24 volts	27.9 C	70 %	1149 hPa	18 %
1784660998	5.24 volts	28.3 C	69 %	1151 hPa	36 %
1784659698	5.24 volts	31.4 C	62 %	1154 hPa	36 %
1784658398	5.22 volts	27.6 C	69 %	1149 hPa	32 %
1784657098	5.22 volts	27.5 C	69 %	1149 hPa	32 %

*Used Equation Coefficients:

Vbat: 0, 1, 0

Temp: 0, 1, 0

RH: 0, 1, 0

Patm: 0, 1, 0

Lum.: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)