Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object YD0AFF-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>
Time RxTraffic* TxTraffic* RxDrop* RSSI* Voltage*
1784630620 21 Pkt 0 Pkt 0 Pkt 31 dBm 8.31 V
1784629985 25 Pkt 0 Pkt 0 Pkt 31 dBm 8.29 V
1784629359 18 Pkt 0 Pkt 0 Pkt 31 dBm 8.31 V
1784628732 20 Pkt 0 Pkt 0 Pkt 31 dBm 8.33 V
1784628107 20 Pkt 0 Pkt 0 Pkt 31 dBm 8.31 V
1784627480 20 Pkt 0 Pkt 0 Pkt 31 dBm 8.31 V
1784626854 24 Pkt 0 Pkt 0 Pkt 31 dBm 8.31 V
1784626228 22 Pkt 0 Pkt 0 Pkt 31 dBm 8.31 V
1784625603 21 Pkt 0 Pkt 0 Pkt 31 dBm 8.31 V
1784624976 27 Pkt 0 Pkt 0 Pkt 31 dBm 8.31 V
1784624348 25 Pkt 0 Pkt 0 Pkt 31 dBm 8.31 V
1784623721 22 Pkt 0 Pkt 0 Pkt 31 dBm 8.31 V
1784623094 28 Pkt 0 Pkt 0 Pkt 31 dBm 8.29 V
1784622462 19 Pkt 0 Pkt 0 Pkt 31 dBm 8.29 V
1784621836 27 Pkt 0 Pkt 0 Pkt 31 dBm 8.31 V
1784621209 27 Pkt 0 Pkt 0 Pkt 31 dBm 8.29 V
1784620582 18 Pkt 0 Pkt 0 Pkt 31 dBm 8.31 V
1784619957 23 Pkt 0 Pkt 0 Pkt 31 dBm 8.31 V
1784619327 20 Pkt 0 Pkt 0 Pkt 31 dBm 8.31 V
1784618703 13 Pkt 0 Pkt 0 Pkt 31 dBm 8.31 V
1784618078 25 Pkt 0 Pkt 0 Pkt 31 dBm 8.29 V
1784617451 20 Pkt 0 Pkt 0 Pkt 31 dBm 8.33 V
1784616825 27 Pkt 0 Pkt 0 Pkt 31 dBm 8.37 V
1784616198 26 Pkt 0 Pkt 0 Pkt 31 dBm 8.33 V
1784615570 17 Pkt 0 Pkt 0 Pkt 31 dBm 8.31 V
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)