4X6HP-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 4X6HP-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value3*	Value5*
1785128020	25	2	3
1785127420	24	2	3
1785124424	27	2	7
1785123221	26	2	9
1785122621	26	2	10
1785122021	25	2	11
1785120821	28	2	13
1785120221	26	2	14
1785119620	24	2	14
1785119020	26	2	15
1785117220	24	2	17
1785116020	22	2	18
1785114819	22	2	20
1785113618	22	2	25
1785113018	24	2	29
1785112421	25	2	33
1785111821	21	2	38
1785110621	23	3	45
1785110021	23	3	48
1785108820	20	2	53
1785108220	22	2	55
1785107620	21	2	57
1785107020	20	2	58
1785106419	18	2	60
1785105819	16	2	61

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)