IR3ZXS-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR3ZXS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784687245	13.95 Volt	810 Pkt	180 Pkt	78 Pcnt
1784686651	13.95 Volt	780 Pkt	180 Pkt	77 Pcnt
1784686645	13.95 Volt	780 Pkt	180 Pkt	77 Pcnt
1784686045	13.95 Volt	780 Pkt	180 Pkt	78 Pcnt
1784685466	13.95 Volt	790 Pkt	180 Pkt	78 Pcnt
1784684845	13.95 Volt	780 Pkt	170 Pkt	77 Pcnt
1784684245	13.95 Volt	800 Pkt	170 Pkt	78 Pcnt
1784683645	13.95 Volt	810 Pkt	170 Pkt	80 Pcnt
1784683046	13.95 Volt	820 Pkt	180 Pkt	81 Pcnt
1784683045	13.95 Volt	820 Pkt	180 Pkt	81 Pcnt
1784682445	13.95 Volt	810 Pkt	170 Pkt	82 Pcnt
1784681845	13.8 Volt	820 Pkt	170 Pkt	80 Pcnt
1784681252	13.95 Volt	810 Pkt	170 Pkt	81 Pcnt
1784681245	13.95 Volt	810 Pkt	170 Pkt	81 Pcnt
1784680645	13.95 Volt	830 Pkt	190 Pkt	80 Pcnt
1784680045	13.88 Volt	850 Pkt	190 Pkt	80 Pcnt
1784679447	13.95 Volt	850 Pkt	190 Pkt	79 Pcnt
1784679445	13.95 Volt	850 Pkt	190 Pkt	79 Pcnt
1784678845	13.95 Volt	890 Pkt	210 Pkt	78 Pcnt
1784678245	13.95 Volt	910 Pkt	210 Pkt	78 Pcnt
1784677648	13.95 Volt	920 Pkt	210 Pkt	79 Pcnt
1784677645	13.95 Volt	920 Pkt	210 Pkt	79 Pcnt
1784677045	13.95 Volt	940 Pkt	210 Pkt	80 Pcnt
1784676445	13.95 Volt	910 Pkt	210 Pkt	78 Pcnt
1784675848	13.95 Volt	910 Pkt	220 Pkt	77 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)