HS4NIY-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4NIY-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1773049271	7 ug/m3	151 ug/m3	155 ug/m3	31 dBm	7.69 V
1773048570	6 ug/m3	153 ug/m3	154 ug/m3	31 dBm	8 V
1773047869	4 ug/m3	151 ug/m3	151 ug/m3	31 dBm	8.33 V
1773047167	6 ug/m3	152 ug/m3	154 ug/m3	31 dBm	8.63 V
1773045766	5 ug/m3	154 ug/m3	154 ug/m3	31 dBm	9.02 V
1773045065	5 ug/m3	149 ug/m3	150 ug/m3	31 dBm	9.21 V
1773044364	4 ug/m3	155 ug/m3	158 ug/m3	31 dBm	9.43 V
1773043663	7 ug/m3	154 ug/m3	154 ug/m3	31 dBm	9.6 V
1773042961	6 ug/m3	153 ug/m3	156 ug/m3	31 dBm	9.54 V
1773042260	7 ug/m3	151 ug/m3	155 ug/m3	31 dBm	9.19 V
1773041559	5 ug/m3	154 ug/m3	154 ug/m3	31 dBm	9.99 V
1773040859	8 ug/m3	156 ug/m3	156 ug/m3	31 dBm	10.13 V
1773040167	7 ug/m3	156 ug/m3	157 ug/m3	31 dBm	10.19 V
1773039466	4 ug/m3	155 ug/m3	156 ug/m3	31 dBm	10.23 V
1773038767	7 ug/m3	155 ug/m3	157 ug/m3	31 dBm	10.34 V
1773038064	7 ug/m3	153 ug/m3	155 ug/m3	31 dBm	10.27 V
1773037363	3 ug/m3	147 ug/m3	149 ug/m3	31 dBm	10.48 V
1773036664	7 ug/m3	151 ug/m3	151 ug/m3	31 dBm	10.77 V
1773035961	4 ug/m3	151 ug/m3	152 ug/m3	31 dBm	10.75 V
1773035260	4 ug/m3	147 ug/m3	147 ug/m3	31 dBm	10.87 V
1773034564	4 ug/m3	158 ug/m3	163 ug/m3	31 dBm	10.79 V
1773033863	7 ug/m3	159 ug/m3	159 ug/m3	31 dBm	11.12 V
1773032461	6 ug/m3	162 ug/m3	165 ug/m3	31 dBm	11.32 V
1773031760	6 ug/m3	160 ug/m3	162 ug/m3	31 dBm	11.5 V
1773031059	6 ug/m3	160 ug/m3	160 ug/m3	31 dBm	11.48 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)