ER-RTLSDR Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ER-RTLSDR. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1788567568	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	1 TXcount/10m
1788566968	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	8 TXcount/10m
1788566368	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	9 TXcount/10m
1788565768	0 RX Erlang	0.61 TX Erlang	0 RXcount/10m	22 TXcount/10m
1788565168	0 RX Erlang	0.49 TX Erlang	0 RXcount/10m	34 TXcount/10m
1788564568	0 RX Erlang	0.9 TX Erlang	0 RXcount/10m	48 TXcount/10m
1788563968	0 RX Erlang	0.89 TX Erlang	0 RXcount/10m	38 TXcount/10m
1788563368	0 RX Erlang	0.64 TX Erlang	0 RXcount/10m	55 TXcount/10m
1788562768	0 RX Erlang	0.36 TX Erlang	0 RXcount/10m	31 TXcount/10m
1788562168	0 RX Erlang	0.65 TX Erlang	0 RXcount/10m	54 TXcount/10m
1788561568	0 RX Erlang	0.54 TX Erlang	0 RXcount/10m	35 TXcount/10m
1788560968	0 RX Erlang	0.61 TX Erlang	0 RXcount/10m	57 TXcount/10m
1788560368	0 RX Erlang	0.79 TX Erlang	0 RXcount/10m	48 TXcount/10m
1788559768	0 RX Erlang	0.62 TX Erlang	0 RXcount/10m	33 TXcount/10m
1788559168	0 RX Erlang	0.63 TX Erlang	0 RXcount/10m	39 TXcount/10m
1788558568	0 RX Erlang	0.85 TX Erlang	0 RXcount/10m	24 TXcount/10m
1788557968	0 RX Erlang	0.84 TX Erlang	0 RXcount/10m	25 TXcount/10m
1788557368	0 RX Erlang	0.9 TX Erlang	0 RXcount/10m	16 TXcount/10m
1788556768	0 RX Erlang	0.86 TX Erlang	0 RXcount/10m	21 TXcount/10m
1788556168	0 RX Erlang	0.74 TX Erlang	0 RXcount/10m	24 TXcount/10m
1788555568	0 RX Erlang	0.84 TX Erlang	0 RXcount/10m	25 TXcount/10m
1788554968	0 RX Erlang	0.79 TX Erlang	0 RXcount/10m	35 TXcount/10m
1788554368	0 RX Erlang	0.78 TX Erlang	0 RXcount/10m	32 TXcount/10m
1788553768	0 RX Erlang	0.57 TX Erlang	0 RXcount/10m	28 TXcount/10m
1788553168	0 RX Erlang	0.66 TX Erlang	0 RXcount/10m	4 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)