KC0LFQ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC0LFQ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Battery*	Temp*
1777772320	10.81 Volts	23.18 Deg.C
1777771716	10.81 Volts	23.18 Deg.C
1777770504	10.81 Volts	22.7 Deg.C
1777769896	10.81 Volts	22.21 Deg.C
1777768684	10.84 Volts	21.72 Deg.C
1777768079	10.84 Volts	21.23 Deg.C
1777767475	10.81 Volts	20.74 Deg.C
1777765647	10.84 Volts	21.23 Deg.C
1777765014	10.87 Volts	21.72 Deg.C
1777763168	10.9 Volts	22.7 Deg.C
1777761928	10.9 Volts	24.16 Deg.C
1777760705	10.9 Volts	25.14 Deg.C
1777760098	11.02 Volts	26.61 Deg.C
1777759491	10.9 Volts	26.12 Deg.C
1777757621	10.96 Volts	25.63 Deg.C
1777757016	10.96 Volts	25.63 Deg.C
1777753386	10.99 Volts	22.7 Deg.C
1777752785	10.99 Volts	22.21 Deg.C
1777752184	11.02 Volts	22.7 Deg.C
1777751525	11.05 Volts	22.21 Deg.C
1777750925	11.05 Volts	22.21 Deg.C
1777749716	11.08 Volts	22.7 Deg.C
1777749122	11.1 Volts	22.7 Deg.C
1777747842	11.13 Volts	22.7 Deg.C
1777746034	11.19 Volts	22.21 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)