SR5ZU Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5ZU. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1761521042	14.38 Volt	20 Pkt	0 Pkt	95 Pcnt	64 Pcnt
1761510952	14.38 Volt	30 Pkt	10 Pkt	81 Pcnt	64 Pcnt
1761507589	14.38 Volt	20 Pkt	0 Pkt	75 Pcnt	64 Pcnt
1761504225	14.38 Volt	50 Pkt	30 Pkt	59 Pcnt	64 Pcnt
1761500862	14.38 Volt	40 Pkt	0 Pkt	30 Pcnt	64 Pcnt
1761497499	14.38 Volt	20 Pkt	0 Pkt	18 Pcnt	64 Pcnt
1761494135	14.38 Volt	80 Pkt	60 Pkt	63 Pcnt	64 Pcnt
1761490772	14.38 Volt	60 Pkt	50 Pkt	57 Pcnt	64 Pcnt
1761487409	14.38 Volt	20 Pkt	0 Pkt	67 Pcnt	64 Pcnt
1761484045	14.38 Volt	30 Pkt	0 Pkt	79 Pcnt	64 Pcnt
1761480682	14.38 Volt	20 Pkt	0 Pkt	73 Pcnt	64 Pcnt
1761477319	14.38 Volt	60 Pkt	40 Pkt	92 Pcnt	64 Pcnt
1761473956	14.38 Volt	90 Pkt	70 Pkt	83 Pcnt	64 Pcnt
1761470592	14.38 Volt	30 Pkt	10 Pkt	81 Pcnt	64 Pcnt
1761467229	14.38 Volt	20 Pkt	0 Pkt	73 Pcnt	64 Pcnt
1761457139	14.38 Volt	20 Pkt	0 Pkt	82 Pcnt	64 Pcnt
1761453776	14.38 Volt	20 Pkt	0 Pkt	77 Pcnt	64 Pcnt
1761447049	14.3 Volt	20 Pkt	0 Pkt	74 Pcnt	64 Pcnt
1761443686	14.3 Volt	10 Pkt	0 Pkt	59 Pcnt	64 Pcnt
1761440323	14.38 Volt	20 Pkt	0 Pkt	66 Pcnt	64 Pcnt
1761436959	14.3 Volt	20 Pkt	0 Pkt	74 Pcnt	64 Pcnt
1761430233	14.38 Volt	10 Pkt	0 Pkt	82 Pcnt	64 Pcnt
1761426869	14.38 Volt	20 Pkt	0 Pkt	91 Pcnt	64 Pcnt
1761423506	14.3 Volt	20 Pkt	0 Pkt	92 Pcnt	64 Pcnt
1761420143	14.38 Volt	80 Pkt	60 Pkt	89 Pcnt	64 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)