W5NFL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W5NFL-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784699769	12.96 Volt	130 Pkt	100 Pkt	63 Pcnt
1784699769	12.96 Volt	130 Pkt	100 Pkt	63 Pcnt
1784699469	12.88 Volt	120 Pkt	90 Pkt	61 Pcnt
1784699169	12.88 Volt	120 Pkt	90 Pkt	62 Pcnt
1784699169	12.88 Volt	120 Pkt	90 Pkt	62 Pcnt
1784698869	13.11 Volt	110 Pkt	90 Pkt	61 Pcnt
1784698570	13.19 Volt	100 Pkt	80 Pkt	60 Pcnt
1784698569	13.19 Volt	100 Pkt	80 Pkt	60 Pcnt
1784698269	13.27 Volt	100 Pkt	80 Pkt	59 Pcnt
1784697970	13.27 Volt	100 Pkt	80 Pkt	59 Pcnt
1784697969	13.27 Volt	100 Pkt	80 Pkt	59 Pcnt
1784697669	12.96 Volt	90 Pkt	70 Pkt	59 Pcnt
1784697369	12.88 Volt	90 Pkt	70 Pkt	59 Pcnt
1784697369	12.88 Volt	90 Pkt	70 Pkt	59 Pcnt
1784697069	12.96 Volt	90 Pkt	70 Pkt	58 Pcnt
1784696770	12.96 Volt	90 Pkt	70 Pkt	57 Pcnt
1784696769	12.96 Volt	90 Pkt	70 Pkt	57 Pcnt
1784696469	12.96 Volt	90 Pkt	70 Pkt	55 Pcnt
1784696170	12.96 Volt	80 Pkt	60 Pkt	54 Pcnt
1784696169	12.96 Volt	80 Pkt	60 Pkt	54 Pcnt
1784695869	12.96 Volt	90 Pkt	70 Pkt	56 Pcnt
1784695570	12.96 Volt	80 Pkt	60 Pkt	56 Pcnt
1784695569	12.96 Volt	80 Pkt	60 Pkt	56 Pcnt
1784695269	12.96 Volt	90 Pkt	70 Pkt	57 Pcnt
1784694970	12.96 Volt	90 Pkt	80 Pkt	60 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)