VK4RWN-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RWN-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1773253324	12.75 Volt	350 Pkt	190 Pkt	68 Pcnt
1773247918	12.6 Volt	220 Pkt	120 Pkt	63 Pcnt
1773244325	12.75 Volt	260 Pkt	110 Pkt	62 Pcnt
1773242512	12.75 Volt	270 Pkt	120 Pkt	65 Pcnt
1773240717	12.75 Volt	270 Pkt	130 Pkt	68 Pcnt
1773237115	12.75 Volt	260 Pkt	120 Pkt	68 Pcnt
1773235306	12.83 Volt	270 Pkt	120 Pkt	66 Pcnt
1773233503	12.83 Volt	280 Pkt	120 Pkt	65 Pcnt
1773228099	12.83 Volt	270 Pkt	130 Pkt	59 Pcnt
1773220895	12.83 Volt	270 Pkt	120 Pkt	66 Pcnt
1773204677	13.28 Volt	220 Pkt	90 Pkt	55 Pcnt
1773202882	13.2 Volt	110 Pkt	50 Pkt	44 Pcnt
1773179454	13.2 Volt	410 Pkt	170 Pkt	62 Pcnt
1773175852	12.75 Volt	470 Pkt	180 Pkt	60 Pcnt
1773172246	12.68 Volt	390 Pkt	190 Pkt	71 Pcnt
1773168641	12.68 Volt	280 Pkt	130 Pkt	66 Pcnt
1773161434	12.75 Volt	280 Pkt	130 Pkt	65 Pcnt
1773129005	12.9 Volt	230 Pkt	110 Pkt	64 Pcnt
1773127203	12.9 Volt	310 Pkt	140 Pkt	60 Pcnt
1773119996	13.58 Volt	250 Pkt	120 Pkt	60 Pcnt
1773116391	13.35 Volt	220 Pkt	110 Pkt	56 Pcnt
1773114591	13.58 Volt	220 Pkt	100 Pkt	56 Pcnt
1773110986	13.35 Volt	210 Pkt	110 Pkt	53 Pcnt
1773107384	13.28 Volt	230 Pkt	110 Pkt	56 Pcnt
1773092969	13.13 Volt	240 Pkt	120 Pkt	61 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)